If toner scatters on hands or clothing, immediately wipe it off or wash it with cold water.ħ. Push down the green lock lever and take the toner cartridge out of the drum unit. We recommend placing the drum and toner assembly on a piece of disposable paper in case you accidentally spill or scatter toner.Ĥ. Remove the drum unit and toner cartridge assembly from the machine. Reinstall the toner and drum assembly into the printer and close the front cover.3. If you do not return the green tab to the home position, this could result in a vertical stripe on printed pages. Be sure to return the green tab to the home position on the right (1). Clean the primary corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times. If you put it in properly, the lock lever will lift automatically.ħ. Install the new toner cartridge firmly into the drum unit until you hear it lock into place.
Hold the cartridge level with both hands and gently rock it from side to side five to six times to evenly spread the toner inside the cartridge.Ħ.
NOTE: If toner scatters on your hands or clothes, immediately wash it off with cold water.Ĥ. Push down the green lock lever on the left side of the toner and drum assembly and lift the toner cartridge off of the drum unit. Be sure to place the assembly on a disposable piece of paper in case of spilled or scattered toner.ģ. Pull out the toner and drum assembly by pulling on the handle in the middle of the toner and drum assembly. Open the front cover by placing your hand on the top center section of the printer (above the word Brother) and pull forward.Ģ. Make sure the printing is powered on and then follow the steps below to install a new toner cartridge.ġ. Approximate cartridge yield is declared in accordance with ISO/IEC 19752 (Letter/A4). The yield of the starter cartridge is approx. The Brother limited warranty does not apply to any issues that are caused by the use of third party drum units, toner cartridges, or toner.
Using non-Brother supplies may affect the hardware performance, print quality, and machine reliability. Each individual component is designed to work with the other to ensure quality and reliability. Each Brother laser printer is designed to work at pre-set temperatures that are matched exactly to each of our individual toner formulations. Brother strongly recommends that customers use only genuine Brother drum units and toner cartridges.
0 kommentar(er)
